|
Inverter  
690+ Integrator
0.75 to 355kW
 The 690+ series is a single range of ac drives designed to meet the requirements of all variable speed applications from simple single motor speed control through to the most sophisticated integrated multi drive systems.
At the heart of the 690+ is a highly advanced, 32-bit microprocessor based, motor control algorithm, to which can be added a host of control options that allow you to tailor the drive to meet your exact requirements.
Three phase (380-500V) ratings are available from 0.37 to 355kW and single phase ratings (220-240V) from 0.37 to 2.2kW.
- Open Loop (V/F), Sensorless Vector and Closed Loop Vector in a single drive
- Powers up to 355KW
- Function Block Programming
- Common Programming, Fieldbus and Software Tools with the 590+ Integrator DC series
- Dual rated for constant or quadratic“fan” torque
- Integral EMC Compliant Filters
STANDARDS
The 690+ series meets the following standards when installed in accordance with the relevant product manuals.
- CE marked to EN50178 (Safety, Low Voltage Directive)
- EN61800-3 (EMC Compliance) with integral filter
- EN50178 (safety, low voltage directive)
- listed to US & Canadian safety standards
TECHNICAL SPECIFICATION
Power Supply
220-240Vac (±10%) single or three phase;
380- 460Vac (±10%) three phase; (500V option available)
Ambient
Constant torque ratings – 0-45°C (40°C with IP40 cover);
Derate from above temperatures to 50°C max
Altitude up to 1000m ASL, derate
1% per 100m above 1000m
Overload
Constant torque ratings – 150% for 60 seconds, 180% for 1 second;
Quadratic torque ratings – 115% for 10 seconds
Output Frequency
Frame B 3,6 or 9kHz; Frame C, D, E and F 3 or 6kHz (all with audibly silent switching pattern)
Dynamic Braking
Frame B and C standard; Frame D,E and F optional
Environmental Protection
IP20
INPUTS/OUTPUTS
Analogue Inputs
4 User configurable, 10bit (12 bit with systems expansion module). 0-10V, 0-±10V, 0-20mA, 4-20mA
Analogue Outputs
3 User configurable, 10 bit. 0-10V, 0-±10V, 0-20mA, 4-20mA
Digital Inputs
8 User configurable, nominal 24V dc (30V dc max).
Digital Outputs
3 User configurable, volt free contact 3A at 230 Vac
Reference Supplies
+10V dc, -10V dc, +24V dc.
Function Block Programming
Function Block Programming allows almost limitless combinations of user functions to be realised with ease. Out of the box the Function Blocks are pre-configured to perform as a standard inverter for immediate use. However by using the programming module or Configed Lite+ software package (see page 62) each function of the drive can be interconnected to any other to perform the required control action.
Function Blocks include;
- Value Functions:
If, Addition, Difference, Multiplication, Division, Greater than, Less than, Counter, Timer
- Logic Functions:
Not, And, Nand, Or, Nor, Xor, Trigger, Flip-Flop
- Standard Macro’s:
Basic Speed Control, Forward/Reverse, Raise/Lower, Process PID, Preset Speeds, Closed Loop Speed Feedback, Winder Control
6901 Man Machine Interface
The 6901 Man Machine Interface is used for configuring, parametising and controlling the drive. It has been ergonomically designed to provide intuitive access to all functions in a logical menu driven format.
Key features include:
- Detachable for 690+ or control panel mounting
- Back lit display
- Multilingual 32 character alphanumeric readout
- Local control of speed, start/stop, jog and direction
- Customised displays and legend
- Password and function lockout
- Quick set up menu
Systems Expansion Module
An optional add-on systems expansion module is available for more advanced applications including phase locking between drives and register control.
Key features include:
- 5 Extra configurable digital inputs/outputs
- 4 High resolution (12 bit plus sign) analogue inputs
- 2 Extra encoder inputs
- 2 High speed register mark inputs
|
